Product Description

IEC60068-2-68 Walk In Chamber For Sand Dust-Proof Test

Walk in Chamber for Sand Dust-proof Test

Application

The UPS energy storage battery pack is a battery module that is connected by a plurality of single cells, and the battery is protected by a protective plate. The new energy automobile sand dust test chamber is a fine sand or dust that can simulate the real environment in advance to the industrial machinery. Or the destructive test of industrial products, in order to prevent the direct damage caused by the related machinery or products in the actual application, resulting in direct major economic losses!

At present, it is mainly used in many electric vehicle battery packs such as pure electric vehicles, which adopts 3265-5Ah type batteries, and requires battery packs to be waterproof and dustproof. In particular, the batteries of new energy vehicles are more affected by sand and dust. New energy vehicle dustproof room, walk-in sand dust test room, dust detection test room, IP6X test room can meet IEC-60529, ISO-20653, GB2423, DIN-40050, GB4706, GB4208, medium household appliances, low-voltage electrical appliances , automotive and motorcycle parts enclosure protection level test requirements, applicable to electrical products for the second feature number “IP5X, IP6X” dust test.

System Name	System Function Description	Component Name		Accessories Function Description	Picture
Heating system	Dust preheating	Stainless steel mica sheet heating sleeve		Power: 12K
Control execution system	Guarantee test is standard and effective	Touch programming LCD controller		Input, display: control temperature, time, program: flexible and efficient control system to ensure the ultra-wide temperature range and precise control, but also to provide users with stable performance, flexible control, easy to learn and use the operating experience. Two kinds of control: program / fixed value Temperature measurement range: -90.00 ° C – 200.00 ° C, (-90.00 ° C – -300.00 ° C, optional) Error ± 0.2 ° C;
	circuit control system	High-quality, scientifically equipped circuit control system ensures high-quality features such as reliable, high-efficiency and energy-saving.		AC contactor: Schneider
				Main power switch: Chint Instrument main power on/off control
				Push button switch: Schneider Controller, lighting power control
				Wire and cable: Jin Longyu
				Terminal block: Japan IDEC Wiring port
				Number tube
safety protection	Perfect safety protection device to ensure safe and reliable operation of the product;	Leakage protection
		Overload fuse protection
		Fan overheat protection
Frame shaping	Beautiful and durable interior and exterior chamber materials and careful design and matching are also guarantees of function realization.	chamber		The thickness of SUS304 stainless steel is guaranteed to be free from deformation and leakage, and it is also resistant to corrosion and easy to clean.
Standard configuration (accessory)	The necessary accessory configurations make the instrument function more perfect, giving customers a more intimate experience.	Vacuum pumping (optional)		Vacuum pump suction flow: 0~6L/min, 0~2kpa; vacuum gauge, air filter, centrifugal blower, etc. (optional)
		Power socket in the chamber		1 pcs, dust-proof special socket;
		Test lead hole		φ100 and φ50 each one, with inner and outer sealing cover
		Vibration device	Eccentric motor
control panel	The friendly and simple control panel allows the customer to have no strangeness to the operation of the instrument, and better reflects the characteristics of the instrument that is easy to learn and use.	Controller	Installed in the upper right corner of the machine, according to the ergonomic height setting, the test conditions can be input here, and the interface of the controller is displayed in real time: setting the temperature, time, number of cycles, curve, etc., and also displaying the actual detected temperature in real time, time, curve, etc.
		Power button switch	Red: Schneider has a self-locking switch button for the instrument to run the power on and off, red light.
		illumination	Green light: Schneider has a self-locking switch button, which is used to turn on and off the lighting power supply in the instrument test area